MARELEC OMEGA 2 FISHING NET METER

The DELTA 2 is a computer-controlled automatic mesh length measuring device for determining the mesh size, for example in fishing nets with a predetermined force.
One-handed operation via a graphic display and only three pushbuttons. Here, different prescribed measuring forces can be selected. The measuring sequence number and measurement number are assigned to the device automatically and cannot be manipulated.
By default, meshes from 40 to 200 mm can be measured. For meshes from 10 to 300 mm, the probes are included in the accessories.
Fixed preset forces: 10N; 20N; 50N; 125N.
Optionally, these forces are released and up to 200N.

The DELTA 2 is kept clean with the sensors in the loop. After starting, the length probe moves from long until the set tension is reached. If 2 sec. This force has not been changed, the determined length measurement is displayed. The operator now has the decision to accept this value. To repeat the measurement. Upon acceptance all relevant data are stored and there is an automatic average. The internal memory can store up to 8000 readings. These values can be transferred etc. together with time, date, measurement point to a computer and displayed in a table.
DELTA 2 is a battery farm. It has a repeat function and automatic switch-off when not in use and is dimensioned in such a way that up to 2,500 measurements can be made on a single battery charge. It comes with a battery charger with four different plug adapters. This way international use is guaranteed
---